Virginia Regulatory Town Hall

Final Text

highlight

Action:
Conforming boating equipment requirements to the federal Code of ...
Stage: Final
 
4VAC15-430-20 Definitions

As used in this chapter the following words and terms shall have the following meanings:

"Coastal waters" means the territorial seas of the United States, and those waters directly connected to the territorial seas (i.e., bays, sounds, harbors, rivers, inlets, etc.) where any entrance exceeds two nautical miles between opposite shorelines to the first point where the largest distance between shorelines narrows to two miles, as shown on the current edition of the appropriate National Ocean Service chart used for navigation. Shorelines of islands or points of land present within a waterway are considered when determining the distance between opposite shorelines.

"Passenger" means every person carried on board a vessel other than:

1. The owner or his representative;

2. The operator;

3. Bona fide members of the crew engaged in the business of the vessel who have contributed no consideration for their carriage and who are paid for their services; or

4. Any guest on board a vessel that is being used exclusively for pleasure purposes who has not contributed any consideration, directly or indirectly, for his carriage.

"Personal flotation device" or "PFD" means a device that is approved by the U.S. Coast Guard.

"Racing shell, rowing scull, racing canoe, and racing kayak" means a manually propelled vessel that is recognized by national or international racing associations for use in competitive racing and one in which all occupants row, scull, or paddle, with the exception of a coxswain, if one is provided, and is not designed to carry and does not carry any equipment not solely for competitive racing.

"Recreational vessel" means any vessel being manufactured or operated primarily for pleasure, or leased, rented, or chartered to another for the latter's pleasure. It does not include any vessel engaged in the carrying of any passengers for consideration.

"Sailboard" means a sail-propelled vessel with no freeboard and equipped with a swivel-mounted mast not secured to a hull by guys or stays.

"Throwable PFD" means a PFD that is intended to be thrown to a person in the water. A PFD marked as Type IV or Type V with Type IV performance is considered a throwable PFD unless specifically marked otherwise. A wearable PFD is not a throwable PFD.

"Use" means operate, navigate, or employ.

"Vessel" means every description of watercraft, other than a seaplane on the water, used or capable of being used as a means of transportation on water, but does not include surfboards, tubes, swimming rafts, inflatable toys, and similar devices routinely used as water toys or swimming aids.

"Visual distress signal" means a device that is approved by the U.S. Coast Guard or certified by the manufacturer.

"Wearable PFD" means a PFD that is intended to be worn or otherwise attached to the body. A PFD marked as Type I, Type II, Type III, or Type V with Type I, II, or III performance is considered a wearable PFD.

4VAC15-430-160 Fire extinguishing equipment application and general provisions

A. The provisions of this section through 4VAC15-430-210, with the exception of 4VAC15-430-200, shall apply to all vessels contracted for on or after November 19, 1952. Vessels contracted for prior to that date shall meet the requirements of 4VAC15-430-200.

B. Where equipment in this section is required to be of an approved type, such equipment requires the specific approval of the U.S. Coast Guard. A listing of current and formerly approved equipment and materials may be found at https://cgmix.uscg.mil/%u200Bequipment.

C. All hand-portable fire extinguishers, semiportable fire extinguishing systems, and fixed fire extinguishing systems shall be of a type approved by the U.S. Coast Guard and shall have an efficient charge and be in good and serviceable condition as referenced in 4VAC15-430-170.

4VAC15-430-170 Hand-portable fire extinguishers and semiportable fire extinguishing systems

A. Hand-portable fire extinguishers and semiportable fire extinguishing systems are classified by a combination letter and number symbol, the letter indicating the type of fire that the unit could be expected to extinguish, and the number indicating the relative size of the unit.

B. For the purpose of this section, all required hand-portable fire extinguishers and semiportable fire extinguishing systems are of the "B" type; i.e. that is, suitable for extinguishing fires involving flammable liquids, greases, etc.

C. The number designations for size will start with "I" for the smallest to "V" for the largest. For the purpose of this section, only sizes I through III will be considered. Sizes I and II are considered hand-portable fire extinguishers and sizes III, IV, and V are considered semiportable fire extinguishing systems that shall be fitted with suitable hose and nozzle or other practicable means so that all portions of the space concerned may be covered. Examples of size graduations for some of the typical hand-portable fire extinguishers and semiportable fire extinguishing systems are set forth in the following table:

Classification

Foam (gallons)

Carbon Dioxide (pounds)

Dry Chemical (pounds)

Type

Size

B

I

1.75

4

2

B

II

2.50

15

10

B

III

12.00

35

20

All fire extinguishers must be on board and readily accessible, in good and serviceable working condition, and comply with the following:

1. If the extinguisher has a pressure gauge reading or indicator, it must be in the operable range or position.

2. The extinguisher may not be expired or appear to have been previously used.

3. The lock pin is firmly in place.

4. The discharge nozzle is clean and free of obstruction.

5. The extinguisher does not show visible signs of significant corrosion or damage.

D. All hand-portable fire extinguishers and semiportable fire extinguishing systems shall have permanently attached thereto a metallic name plate giving the name of the item, the rated capacity in gallons, quarts, or pounds, the name and address of the person or firm for whom approved, and the identifying mark of the actual manufacturer.

E. Vaporizing-liquid type fire extinguishers containing carbon tetrachloride or chlorobromomethane or other toxic vaporizing liquids are not acceptable as equipment required by this section.

F. Hand-portable or semiportable extinguishers that are required on their name plates to be protected from freezing shall not be located where freezing temperatures may be expected.

G. The use of dry chemical, stored pressure, fire extinguishers not fitted with pressure gauges or indicating devices, manufactured prior to January 1, 1965, may be permitted on motorboats and other vessels so long as such extinguishers are maintained in good and serviceable condition. The following maintenance and inspections are required for such extinguishers:

1. When the date on the inspection record tag on the extinguishers shows that six months have elapsed since last weight check ashore, then such extinguisher is no longer accepted as meeting required maintenance conditions until reweighed ashore and found to be in a serviceable condition and within required weight conditions.

2. If the weight of the container is one-fourth ounce less than that stamped on container, it shall be serviced.

3. If the outer seal or seals (which that indicate tampering or use when broken) are not intact, the boarding officer or marine inspector will inspect such extinguisher to see that the frangible disc in neck of the container is intact; and if such disc is not intact, the container shall be serviced.

4. If there is evidence of damage, use, or leakage, such as dry chemical powder observed in the nozzle or elsewhere on the extinguisher, the container shall be replaced with a new one and the extinguisher properly serviced or the extinguisher replaced with another approved extinguisher.

H. The dry chemical, stored pressure, fire extinguishers without pressure gauges or indicating devices manufactured after January 1, 1965, shall not be carried on board motorboats or other vessels as required equipment.

4VAC15-430-180 Fixed fire extinguishing systems

When a fixed fire extinguishing system is installed, it shall be of an approved carbon dioxide type, that is designed and installed in agreement with the applicable provisions required by the U.S. Coast Guard.

4VAC15-430-190 Fire extinguishing equipment required

A. Motorboats.

1. All motorboats shall carry at least the minimum number of hand-portable fire extinguishers set forth in the following table, except that motorboats less than 26 feet in length, propelled by outboard motors and not carrying passengers for hire, need not carry such portable fire extinguishers if the construction of such motorboats will not permit the entrapment of explosive or flammable gases or vapors.

Length, feet

Minimum number of B-I 5-B hand-portable fire extinguishers required1

No fixed fire extinguishing systems in machinery space

Fixed fire extinguishing system in machinery space

Under 16

1

0

16 to less than 26

1

0

26 to less than 40

2

1

40 to 65

3

2

1One B-II 20-B hand-portable fire extinguisher may be substituted for two B-I 5-B hand-portable fire extinguishers.

2. Fire extinguishers are required if any one or more of the following conditions exist:

a. Closed compartment under thwarts and seats wherein portable fuel tanks may be stored.

b. Double bottoms not sealed to the hull or that are not completely filled with flotation material.

c. Closed living spaces.

d. Closed stowage compartments in which combustible or flammable materials are stowed.

e. Permanently installed fuel tanks.

3. The following conditions do not, in themselves, require that fire extinguishers be carried:

a. Bait wells.

b. Glove compartments.

c. Buoyant flotation material.

d. Open slatted flooring.

e. Ice chests.

B. Motor vessels Motorboats greater than 65 feet in length.

1. All motor vessels motorboats greater than 65 feet in length shall carry at least the minimum number of hand-portable fire extinguishers set forth in the following table below:

Gross tonnage

Minimum number of B-II 20-B hand-portable fire extinguishers

Over

Not over

50

2

50

100

2

100

500

3

500

1000

6

1000

8

2. In addition to the hand-portable fire extinguishers required by subdivision 1 of this subsection, the following fire-extinguishing equipment shall be fitted in the machinery space:

a. One Type B-II 20-B hand-portable fire extinguisher shall be carried for each 1,000 B.H.P. of the main engines or fraction thereof. However, not more than six such extinguishers need be carried.

b. On motor vessels motorboats of over 300 gross tons, either one Type B-III 160-B semiportable fire-extinguishing system shall be fitted, or alternatively, a fixed fire extinguishing system shall be fitted in the machinery space.

3. The frame or support of each Type B-III 160-B fire extinguisher required by subdivision 2 b of this subsection must be welded or otherwise permanently attached to a bulkhead or deck.

4. If an approved semiportable fire extinguisher has wheels and is not required by this section, it must be securely stowed when not in use to prevent it from rolling out of control under heavy sea conditions.

C. Barges carrying passengers.

1. Every barge of 65 feet in length or less while carrying passengers when towed or pushed by a motorboat, motor vessel, or steam vessel shall be fitted with hand-portable fire extinguishers as required by the table in subsection B of this section, depending upon the length of the barge.

2. Every barge of over 65 feet in length while carrying passengers when towed or pushed by a motorboat, motor vessel, or steam vessel shall be fitted with hand-portable fire extinguishers as required by the table in subsection B of this section, depending upon the gross tonnage of the barge.

4VAC15-430-200 Fire extinguishing equipment on vessels contracted prior to November 19, 1952 Condition and number of fire extinguishers required for recreational vessels

A. Condition and number of fire extinguishers required for recreational vessels built model year 2017 or earlier, between 1953 and 2017, and contracted prior to November 19, 1953.

1. Previously installed extinguishers with extinguishing capacities that are less than what is required in the tables contained in 4VAC15-430-190 need not be replaced but must be maintained in good condition.

2. All extinguishers installed after August 22, 2016, must meet the applicable requirements in 4VAC15-160 through 4VAC15-210.

B. Vessels contracted for prior to November 19, 1952, shall meet the applicable provisions of 4VAC15-430-160 through 4VAC15-430-190 insofar as the number and general type of equipment is concerned. Existing items of equipment and installations previously approved but not meeting the applicable requirements for type approval may be continued in service so long as they are in good condition. All new installations and replacements shall meet the requirements of 4VAC15-430-160 through 4VAC15-430-190.